As an Amazon Associate we earn from qualifying purchases. Links in this article may be affiliate links. How we choose gear
A full-size classical guitar has a nut about 2 inches wide, according to Guitar World’s classical-versus-steel explainer, while a typical electric neck measures about 1.7 inches. That third of an inch (my arithmetic) changes how every one of the classical guitars below feels in the hand, and it is the first filter worth applying in 2027.
The shortlist runs from a solid-spruce starter to a thinline stage model, six nylon-string guitars in all. Specs come from maker and retailer sheets, while the verdicts are attributed to MusicRadar, Guitar World, Sweetwater and Thomann buyer reviews and a few forum threads, because no first-hand notes were supplied for this edition.
Three of the six keep the traditional 52 mm nut. The other three narrow it to roughly 48 mm, which is the territory of a modern classical acoustic guitar built for players who arrive from steel strings or electrics. That split matters more than any brand name, and it organizes everything that follows.
What the classical guitars reviews agree on, and where they split
Two outlets that review classical guitars as a category agree on more than you might expect. MusicRadar’s roundup, last updated in August 2024, and Guitar World’s list, refreshed in February 2026, both name the Taylor Academy 12e-N best overall and put the Godin Multiac Nylon Encore at the top for amplified use. They part ways on framing. Guitar World says the Taylor’s price suits a committed learner, while MusicRadar praises its precise build and electronics and finds the design somewhat clinical.
Classical guitars reviews also leave gaps. Guitar World’s roundup gives a nut width for only one guitar, a Yamaha flamenco model that is not on this list, so the widths below come from maker and retailer spec sheets.
What the shortlist weighed, in order:
- Nut width: 52 mm for traditional spacing, about 48 mm for hybrids.
- Top wood: all six have solid tops; MusicRadar notes that a cedar top adds more low-mid weight than spruce on the same Yamaha body.
- Electronics: acoustic-only guitars cost less, while hybrids add a pickup and tuner.
- Extras: cases, gig bags and setup work that can add to the bill.
Nut width, top wood and price across the shortlist
| Guitar | Top wood | Nut width | Built for | Price tier |
|---|---|---|---|---|
| Yamaha CG122MS | Solid Engelmann spruce | 52 mm (2.05 in) | A traditional first classical | Around $250 |
| Cordoba C5 | Solid Canadian cedar | 52 mm (2 in) | A warmer step-up beginner | Around $450 |
| Yamaha NTX1 | Solid Sitka spruce | 48 mm (1 7/8 in) | Steel and electric players | Check the current price on Amazon.com |
| Cordoba F7 Paco | Solid Canadian cedar | 52 mm (2 in) | Flamenco and low-action playing | Between $500 and $650 |
| Taylor Academy 12e-N | Solid spruce | 1 7/8 in | A hybrid learner who wants a pickup | Around $800 |
| Godin Multiac Nylon Encore | Solid cedar | About 48 mm | Amplified stage use | Around $1,600 to $1,700 |
Every guitar here has a solid top, so price tracks electronics, origin and brand more than wood. The roughly $200 gap between the Yamaha CG122MS and the Cordoba C5 buys a cedar top and a bone nut and saddle in place of urea parts (my arithmetic from the ranges above, with parts per retailer spec pages). Past $800, you are paying mostly for a stage-ready pickup system.
The best classical guitars here, from starter to stage
1. Yamaha CG122MS — solid spruce top at a starter price
Around $250 at a US retailer such as Micheo Music buys a solid Engelmann spruce top, laminated nato back, sides and neck, a rosewood fingerboard and a matte finish. Maker figures reproduced on retailer pages list a 52 mm (2.05-inch) nut, a 650 mm scale and 18 frets, with a urea nut and saddle.
MusicRadar’s Dave Burrluck reviewed it in 2010 and found it played well straight from the box, helped by the 52 mm nut, a 58 mm spread at the bridge and a comfortable neck profile. He described clear, dry highs, a robust midrange and slightly light bass. His one complaint was the finish of the frets, and the same outlet’s 2024 roundup repeats that note (fret tops slightly rough) alongside the light low end, yet still names it the best beginner classical. Those are two write-ups from one outlet, so count them as a single opinion.
Pros:
- ✅ Solid spruce top for around $250
- ✅ Full 52 mm nut spacing for traditional technique
Cons:
- ❌ Fret tops slightly rough, per MusicRadar
- ❌ Light low end, and no case in the box
A cedar-top version exists if you want the warmer low-mid that MusicRadar describes.
2. Cordoba C5 — a cedar top and a warmer voice
Stepping up from the Yamaha costs roughly $200, with retailers such as zZounds and Sims Music showing the Cordoba C5 near $450, and it changes the top wood, the nut and the saddle. The guitar pairs a solid Canadian cedar top with mahogany back and sides, a C-shaped mahogany neck, 19 frets, a 52 mm nut and a bone nut and saddle. Listings describe Torres-style five-fan bracing and an adjustable truss rod built into the neck.
Bradford Werner’s review at This Is Classical Guitar, written in 2018 and kept up to date since, credits it with good volume and sustain. He calls the tone improvable but better than most rivals at the price, finds the tuners less refined than those on the Cordoba C10, and ordered one for a student. Reviewers and retail pages agree that the back and sides are laminate, which is standard under $500.
Two nearby listings can mislead. The Cordoba C5-CE adds electronics and is a separate model whose retailer spec page lists a 50 mm nut, and Cordoba also sells a spruce-top version of the Cordoba C5, so confirm the cedar-top standard model before ordering.
Check the current price on Amazon.com.
3. Yamaha NTX1 — a 48 mm neck for steel-string hands
Unplugged volume is where the Yamaha NTX1 gives ground, and Sweetwater owners say so: one calls it quiet without an amp, another finds it less warm and resonant than a standard classical. MusicRadar agrees in milder words, describing the acoustic sound as balanced but slightly quiet in its best-crossover pick.
The trade is a neck designed for guitarists arriving from steel strings or electrics. Retailer sheets list a solid Sitka spruce top, nato back, sides and neck, a walnut fingerboard on a 600 mm (about 23 5/8-inch) radius, a 650 mm scale, a 48 mm nut and a thinline body 80 to 90 mm deep. String spacing is quoted at 10.6 mm, against 11.8 mm on the Yamaha CG122MS, which is about 1.2 mm tighter per gap (my arithmetic). Electronics are an under-saddle pickup with three-band EQ and a tuner.
Sweetwater’s page shows 4.6 out of 5 across 15 reviews, with the amplified sound drawing most of the praise: feedback-resistant pickup tone, useful EQ and an accurate tuner. Two of the 15 describe setup trouble. One found the action about a quarter inch at the 12th fret, unplayable until adjusted, and another needed a luthier to reduce the bridge height. A third reviewer finds the spacing tight for some chords and fingerstyle pieces, and one swapped the medium strings for lighter D’Addario Classics. These are individual reports, yet they make a setup check on arrival worthwhile.
The case is not included, per retailer spec sheets, and one owner notes that the electronics run on AA batteries.
4. Cordoba F7 Paco — flamenco snap with cedar warmth
Guitar World says the design draws on instruments from Paco de Lucía’s collection, and Sweetwater’s description explains what comes with that: a thinner Spanish flamenco-style body, 3.5 inches deep at the lower bout according to MusicRadar, for a snappy, bright sound. Cedar over Indian rosewood is the unusual pairing, and a zZounds spec page says it gives a fuller, darker and less biting voice than the standard Cordoba F7.
The Cordoba F7 Paco has a 52 mm nut, a 650 mm scale, 19 frets and a mahogany neck with a rosewood fingerboard. Guitar World says the low action and flat neck suit barre chords and fast single-note work, and that purists may dislike the dual-action truss rod. Its spec block gives about $650 while its own text says around $500, so the price runs between $500 and $650 depending on the source.
Thomann’s page shows 4.4 out of 5 from 44 ratings. Of the nine review texts visible there, two report fret buzz. One owner’s luthier traced buzzing on the D and G strings under hard playing to uneven fret height and fixed it, and another describes “severe fret buzz on one of the frets.” A third buyer reports a damaged guitar arriving, and one reviewer finds the factory Savarez strings high in tension and suggests softer sets. A zZounds reviewer relays a shop owner’s remark that true flamenco setups sit low enough to buzz on every string.
Pros:
- ✅ Lively, articulate sound in a slim, comfortable body, per Guitar World
- ✅ Solid cedar top and rosewood back and sides for the money, per MusicRadar
Cons:
- ❌ Fret buzz reports among Thomann reviewers
- ❌ Case sold separately
See the current price on Amazon.com.
5. Taylor Academy 12e-N — hybrid neck with a built-in armrest
At around $800, this is the second-priciest guitar on the list, and Guitar World’s reviewer says the cost suits a more committed learner. That $799 figure appears at several retailers, including Elderly Instruments and George’s Music. The money buys a Grand Concert body (15 inches wide and 4 3/8 deep, per The Music Emporium), a 25.5-inch scale, a 1 7/8-inch nut, a slightly radiused ebony fingerboard, a bevelled armrest, a built-in pickup system and a gig bag.
MusicRadar puts the nut about an eighth of an inch narrower than a typical 2-inch classical, praises the precise build and finds that a hard attack brings out a borderline flamenco voice. Guitar World likes the light weight and says the electronics preserve the guitar’s natural resonance at higher volumes, though it warns that the neck could be too narrow for some players.
One caution on versions: both outlets tested examples with a Lutz spruce top and layered sapele back and sides, while Taylor’s site now lists layered walnut, so treat their tonal notes as close rather than identical.
Pros:
- ✅ Precise build and light weight, per Guitar World
- ✅ Electronics that keep natural resonance at volume
Cons:
- ❌ Neck may feel narrow to some hands
- ❌ A somewhat clinical design, per MusicRadar
6. Godin Multiac Nylon Encore — a thinline nylon built for the stage
Godin builds nylon guitars in two spirits. MusicRadar says its traditional-spec models give purists a virtually flat fingerboard and a 51 mm (2-inch) nut, while the Encore courts steel-string crossovers with a narrower nut, a more cambered board and a neck that joins the body between the 15th and 16th frets.
The Godin Multiac Nylon Encore has a solid cedar top over a chambered silver leaf maple body with Laurentian basswood wings, a mahogany neck, a rosewood fingerboard on a 16-inch radius, 22 frets and a 25.5-inch scale. Retailers disagree on the nut: zZounds lists 1 7/8 inches and Long & McQuade 1.9 inches, so call it about 48 mm. Dual-source electronics blend an under-saddle transducer with a soundboard transducer, and a gig bag is included.
Guitar World’s best-classical roundup praises the live tones, the build and the feedback rejection, finds the D-shaped neck friendly to electric players and was surprised by the projection from such a narrow body. It also says plainly that the guitar is not the best unplugged. MusicRadar lists the price as the only drawback for anyone who is not gigging or recording.
Retailers show it at around $1,600 to $1,700, about twice the Taylor Academy 12e-N, a gap that only makes sense when the stage is the plan.
Take a closer look at the listing on Amazon.com.
Classical guitar vs acoustic guitar: what changes under your fingers
Both share a scale length near 25.5 inches and similar fret counts, according to Andertons, so the differences are about width, tension and voice. Andertons puts the nut at 52 mm on a classical and 43 mm on a steel-string, and Yamaha’s own guide cites the same 52 and 43 mm neck widths, about a centimeter apart. The wider neck exists so fingers can press one nylon string without touching its neighbors during fast passages.
Tension drives the rest. Nylon strings pull far less than steel, so a classical needs less internal reinforcement and generally no truss rod, while Guitar World notes that classicals often use delicate fan bracing and steel-strung guitars a sturdier X-style pattern. Steel strings never belong on a guitar braced for nylon. A few models here carry a truss rod anyway, such as the Cordoba C5 and the Cordoba F7 Paco, and Guitar World says purists may dislike the F7’s dual-action version.
Tone and volume separate them as well. Andertons describes a classical as warm and mellow, with the fundamental emphasized, and a steel-string as bright and percussive. Guitar World adds that steel-strung guitars are generally louder.
The acoustic vs classical guitar choice for beginners is less obvious than it sounds. Andertons says nylon is gentler on fingertips before calluses form, yet classical repertoire is not easier and takes years to master. Guitar World warns that very cheap models of either type tend to have high action and poor intonation, and suggests spending at least $250. Strumming songs point toward steel; fingerstyle, Spanish and flamenco repertoire point toward nylon.
Modern classical acoustic guitar: when a 48 mm neck earns its place
A hybrid trims the nut to about 48 mm, usually adds a radiused fingerboard and often a cutaway and pickup. Three guitars here follow that recipe: the Yamaha NTX1, the Taylor Academy 12e-N and the Godin Multiac Nylon Encore.
Whether 48 mm is the right compromise depends on your hand. One poster on Acoustic Guitar Forum, a steel-string player who also builds nylon-string instruments, found a 47.5 mm nut cramped and more prone to touching adjacent strings, thinks 49 to 50 mm suits their hands better, and still finds the traditional 52 mm too wide. The same poster tried a 20-inch radius and found some pieces harder to bar and stretch than on a flat 49 mm board. That is one poster’s experience, but it matches the Sweetwater owner who finds the Yamaha NTX1 spacing tight for some chords and the Guitar World note that the Taylor’s neck may be too narrow for some players.
Unplugged volume is the other price of a hybrid. Sweetwater owners and MusicRadar both call the Yamaha NTX1 quiet acoustically, and Guitar World says the Godin Multiac Nylon Encore is not the best unplugged. If most of your playing is at home without an amp, a traditional guitar with a 52 mm nut gives more resonance for less money.
Nylon, steel and a 52 mm nut: the answers buyers want first
❓ Is a classical guitar easier to learn on than an acoustic guitar?
❓ Can you put steel strings on a classical guitar?
❓ Is a solid top worth it on a first classical guitar?
❓ What nut width suits a steel-string player moving to nylon?
❓ Does a nylon-string guitar need built-in electronics?
Matching a neck width to the way you play
Your hand and your repertoire should pick among the best classical guitars, not the badge on the headstock. For traditional fingerstyle spacing at the lowest cost, the Yamaha CG122MS is the sensible start, and the Cordoba C5 adds cedar and a bone nut for roughly $200 more. Flamenco players get low action and a thin body from the Cordoba F7 Paco, provided the frets are checked on arrival. Steel-string and electric players should try the 48 mm necks of the Yamaha NTX1 or the Taylor Academy 12e-N, and the Godin Multiac Nylon Encore is the stage choice for anyone with the budget.
If you are weighing classical guitars for 2027, set a budget, measure your comfort at 52 mm against 48 mm, and decide whether you need a pickup before comparing woods. Check current availability on Amazon.com.
Recommended for You
- Bass drum mallets: What Suits Your Drum and Budget
- Bass flutes: What Suits Your Budget and Role
- Burswood guitar: Which One Fits Your Budget?
Disclaimer: This post contains affiliate links. As an Amazon Associate, I earn from qualifying purchases made through these links, at no additional cost to you.
Choose by the width of your hand first and the name on the headstock second.





